- Large Units Primary $5995 / Secondary $4995
- Small Units Primary $4995 / Secondary $3995
Note: Primary Units have the computer, screen, power, interface components, etc., but the Secondary (slave) units do not. Secondary units are attached to the primary unit by a cable and are powered and controlled by the primary unit.
Small Unit
-
Model Number
KCB 16
16 individual Boxes
-
Entire Unit Size
Width x Height x Depth
17" x 24" x 10"
-
Individual Box Size
Width x Height x Depth
4" x 3" x 8"
-
Weight
55 lbs
Large Unit
-
Model Number
KCB 32
32 individual Boxes
-
Entire Unit Size
Width x Height x Depth
17" x 36" x 10"
-
Individual Box Size
Width x Height x Depth
4" x 3" x 8"
-
Weight
75 lbs
Small Unit
-
Model Number
KCB 8
8 individual Boxes
-
Entire Unit Size
Width x Height x Depth
17" x 24" x 10"
-
Individual Box Size
Width x Height x Depth
8" x 3" x 8"
-
Weight
54 lbs
Large Unit
-
Model Number
KCB 16D
16 individual Boxes (image not shown)
-
Entire Unit Size
Width x Height x Depth
17" x 36" x 10"
-
Individual Box Size
Width x Height x Depth
8" x 3" x 8"
-
Weight
75 lbs
Small Unit
-
Model Number
KCB 4
4 individual Boxes
-
Entire Unit Size
Width x Height x Depth
17" x 24" x 10"
-
Individual Box Size
Width x Height x Depth
8" x 6" x 8"
-
Weight
52 lbs
Large Unit
-
Model Number
KCB 8D
8 individual Boxes (image not shown)
-
Entire Unit Size
Width x Height x Depth
17" x 36" x 10"
-
Individual Box Size
Width x Height x Depth
8" x 6" x 8
-
Weight
75 lbs
STANDARD FEATURES:
Raspberry Pi computer with 4 USB ports and internet port, 10" color touchscreen All Software for Key Management System or Locker System, 19V power transformer for 110V/220V to power all components, Solenoid Controller Board with UPS backup battery controller and cables (Battery Sold Separately), gray powder-coated steel cabinet, heavy duty door locks, high-security panel lock. 90-Day Unconditional Warranty, 24/7 technical support via phone and email.
OPTIONAL COMPONENTS:
Various sizes of Backup Batteries, Camera, Magnetic Card Reader, HID/RFID Reader, Fingerprint Reader, Barcode Reader.
IMPORTANT! ALL UNITS ARE PLUG and PLAY...simply mount it on the wall with the included easy-mount bracket, attach the power and internet cable (if internet Capability is desired), and start using it immediately.
A power cable is provided... to plug into a standard 110v power outlet.
it is recommended that the power (and internet) outlet be located approximately 24" above the floor, in the location where the KeyCodeBox will be mounted on the wall.